China wholesale Copper Drawing Machine - Inverted Vertical Drawing Machine PengSheng
China wholesale Copper Drawing Machine - Inverted Vertical Drawing Machine PengSheng Detail:
●High efficiency water cooled capstan & drawing die
●HMI for easy operation and monitoring
●Water cooling for capstan and drawing die
●Single or double dies / Normal or pressure dies
|
Block diameter |
DL 600 |
DL 900 |
DL 1000 |
DL 1200 |
|
Inlet wire material |
High/Medium/Low carbon steel wire; Stainless wire, Spring wire |
|||
|
Inlet wire Dia. |
3.0-7.0mm |
10.0-16.0mm |
12mm-18mm |
18mm-25mm |
|
Drawing speed |
According to the d |
|||
|
Motor power (For reference) |
45KW |
90KW |
132KW |
132KW |
|
Main bearings |
International NSK, SKF bearings or customer required |
|||
|
Block cooling type |
Water flow cooling |
|||
|
Die cooling type |
Water cooling |
|||
Product detail pictures:
Related Product Guide:
Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for China wholesale Copper Drawing Machine - Inverted Vertical Drawing Machine PengSheng , The product will supply to all over the world, such as: California, Hanover, Dubai, We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we've got better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We have been always here working for your demands whenever you require.
By Mag from Boston - 2017.10.13 10:47
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Christopher Mabey from Slovakia - 2017.02.18 15:54
Related products
-
Hot sale Factory Steel Wire Processing Machine ...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Trending Products Steel Rope Cage Stranding Mac...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Factory Cheap Hot Flux Cored Welding Wire Produ...
The line is composed by following machines ● Horizontal or vertical type coil pay-off ● Mechanical descaler & Sand belt descaler ● Water rinsing unit & Electrolytic pickling unit ● Borax coating unit & Drying unit ● 1st Rough dry drawing machine ● 2nd Fine dry drawing machine ● Triple recycled water rinsing & pickling unit ● Copper coating unit ● Skin pass machine ● Spool type take-up ● Layer rewinder Main technical specifications Item Typical Specification Inlet wir...
-
Renewable Design for Under Roller Type Steel St...
Pay-offs Hydraulic vertical pay-off: Double vertical hydraulic rod stems that easy for wire loaded and capable of continuous wire decoiling. Horizontal pay-off: Simple payoff with two working stems that suitable for the high and low carbon steel wires. It could load two coils of rod that realize the continuous wire rod decoiling. Overhead pay-off: Passive type pay-off for wire coils and equipped with the guiding rollers to avoid any wire disordered. Spool pay-of...
-
Big Discount Wire Extruding Machine - Continuo...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Manufacturer for Steel Wire Processing Machine ...
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requi...