Dry Steel Wire Drawing Machine
Features
● Forged or casted capstan with hardness of HRC 58-62.
● High efficiency transmission with gear box or belt.
● Movable die box for easy adjustment and easy die changing.
● High performance cooling system for the capstan and die box
● High safety standard and friendly HMI control system
Available options
● Rotating die box with soap stirrers or rolling cassette
● Forged capstan and tungsten carbide coated capstan
● Accumulation of first drawing blocks
● Block stripper for coiling
● First level international electrical elements
Main technical specifications
|
Item |
LZn/350 |
LZn/450 |
LZn/560 |
LZn/700 |
LZn/900 |
LZn/1200 |
|
Drawing Capstan |
350 |
450 |
560 |
700 |
900 |
1200 |
|
Max. Inlet Wire Dia.(mm) |
4.3 |
5.0 |
7.5 |
13 |
15 |
20 |
|
Max. Inlet Wire Dia.(mm) |
3.5 |
4.0 |
6.0 |
9 |
21 |
26 |
|
Min. Outlet Wire Dia.(mm) |
0.3 |
0.5 |
0.8 |
1.5 |
2.4 |
2.8 |
|
Max. Working Speed(m/s) |
30 |
26 |
20 |
16 |
10 |
12 |
|
Motor Power(KW) |
11-18.5 |
11-22 |
22-45 |
37-75 |
75-110 |
90-132 |
|
Speed Control |
AC variable frequency speed control |
|||||
|
Noise Level |
Less than 80 dB |
|||||
Related products
-
Flux Cored Welding Wire Production Line
The line is composed by following machines ● Strip pay-off ● Strip surface cleaning unit ● Forming machine with powder feeding system ● Rough drawing and fine drawing machine ● Wire surface cleaning and oiling machine ● Spool take-up ● Layer rewinder Main technical specifications Steel strip material Low carbon steel, stainless steel Steel strip width 8-18mm Steel tape thickness 0.3-1.0mm Feeding speed 70-100m/min Flux filling accuracy ±0.5% Final drawn wire ...
-
Continuous Cladding Machinery
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded t...
-
Aluminum Continuous Casting And Rolling Line—Al...
Brief Process Flow Casting machine to get cast bar → roller shearer → straightener → multi-frequency induction heater → feed-in unit → rolling mill → cooling → coiling Advantages With years of machine improvement, our supplied machine is along with the service as: -high energy saving furnace with controlled molten quality -high productivity and efficiency -easy operation and maintain -consistent rod quality -technical support from machine sta...
-
Auto Coiling&Packing 2 in 1 Machine
Cable coiling and packing is the last station in the cable production procession before stacking. And it is an cable packaging equipment in the end of the cable line. There are several types cable coil winding and packing solution. Most of the factory is using the semi-auto coiling machine in considering the cost at the beginning of the investment. Now it is time to replace it and stop the lost in labor cost by automatic the cable coiling and p...
-
PI Film/Kapton® Taping Machine
Main technical data Round conductor diameter: 2.5mm—6.0mm Flat conductor area: 5 mm²—80 mm²（Width: 4mm-16mm, Thickness: 0.8mm-5.0mm） Rotating speed: max. 1500 rpm Line speed: max. 12 m/min Special Characteristics -Servo drive for the concentric tapping head -IGBT induction heater and moving radiant oven -Auto-stop when film broken -PLC control and touch screen operation Overview Tapi...
-
Vertical DC Resistance Annealer
Design • vertical DC resistance annealer for intermediate drawing machines • digital annealing voltage control for wire with consistent quality • 3-zone annealing system • nitrogen or steam protection system for preventing oxidization • ergonomic and user-friendly design for easy maintenance Productivity • annealing voltage could be chose to meet different wire requirement Efficiency • enclosed annealer for reducing consumption of protective gas Type TH1000 TH2000...