China wholesale Rod Breakdown Line - Wire and Cable Automatic Coiling Machine PengSheng
China wholesale Rod Breakdown Line - Wire and Cable Automatic Coiling Machine PengSheng Detail:
Characteristic
• It could be equipped with cable extrusion line or an individual pay-off directly.
• Servo motor rotation system of the machine can allow the action of wire arrangement more harmonious.
• Easy control by touch screen (HMI)
• Standard service range from coil O.D. 180mm to 800mm.
• Simple and easy to use machine with low maintenance cost.
| Model | Height(mm) | Outer diameter(mm) | Inner diameter(mm) | Wire diameter(mm) | Speed |
| OPS-0836 | 40-80 | 180-360 | 120-200 | 0.5-8 | 500M/min |
| OPS-1246 | 40-120 | 200-460 | 140-220 | 0.8-12 | 350M/min |
| OPS-1860 | 60-180 | 220-600 | 160-250 | 2.0-20 | 250M/min |
| OPS-2480 | 80-240 | 300-800 | 200-300 | 3.0-25 | 100M/min |
Product detail pictures:
Related Product Guide:
We offer fantastic strength in high quality and enhancement,merchandising,income and marketing and procedure for China wholesale Rod Breakdown Line - Wire and Cable Automatic Coiling Machine PengSheng , The product will supply to all over the world, such as: Wellington, Lyon, Mexico, We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
By Belinda from Jamaica - 2017.12.09 14:01
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Wendy from Latvia - 2018.06.05 13:10
Related products
-
Special Price for Wire Fiberglass Insulating Ma...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Discountable price Nitrogen Wiping Steel Wire G...
Pay-offs Hydraulic vertical pay-off: Double vertical hydraulic rod stems that easy for wire loaded and capable of continuous wire decoiling. Horizontal pay-off: Simple payoff with two working stems that suitable for the high and low carbon steel wires. It could load two coils of rod that realize the continuous wire rod decoiling. Overhead pay-off: Passive type pay-off for wire coils and equipped with the guiding rollers to avoid any wire disordered. Spool pay-of...
-
Best quality Straight Line Steel Wire Drawing M...
Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...
-
Factory Cheap Straight Steel Wire Drawing Machi...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
China New Product Electrical Wire Making Machin...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
China Manufacturer for Cabel Making Machine - ...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...