Good quality Flux Cored Welding Wire Manufacturing Line - Welding Wire Drawing & Coppering Line PengSheng
Good quality Flux Cored Welding Wire Manufacturing Line - Welding Wire Drawing & Coppering Line PengSheng Detail:
The line is composed by following machines
● Horizontal or vertical type coil pay-off
● Mechanical descaler & Sand belt descaler
● Water rinsing unit & Electrolytic pickling unit
● Borax coating unit & Drying unit
● 1st Rough dry drawing machine
● 2nd Fine dry drawing machine
● Triple recycled water rinsing & pickling unit
● Copper coating unit
● Skin pass machine
● Spool type take-up
● Layer rewinder
Main technical specifications
|
Item |
Typical Specification |
|
Inlet wire material |
Low carbon steel wire rod |
|
Steel wire diameter(mm) |
5.5-6.5mm |
|
1st Dry drawing process |
From 5.5/6.5mm to 2.0mm |
|
Drawing block No.: 7 |
|
|
Motor power: 30KW |
|
|
Drawing speed: 15m/s |
|
|
2st Dry drawing process |
From 2.0mm to final 0.8mm |
|
Drawing block No.: 8 |
|
|
Motor power: 15Kw |
|
|
Drawing speed: 20m/s |
|
|
Coppering unit |
Only chemical coating type or combined with electrolytic coppering type |
Product detail pictures:
Related Product Guide:
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for Good quality Flux Cored Welding Wire Manufacturing Line - Welding Wire Drawing & Coppering Line PengSheng , The product will supply to all over the world, such as: Gabon, Mombasa, Senegal, We aim to build a famous brand which can influence a certain group of people and light up the whole world. We want our staff to realize self-reliance, then achieve financial freedom, lastly obtain time and spiritual freedom. We do not focus on how much fortune we can make, instead we aim to obtain high reputation and be recognized for our products. As a result, our happiness comes from our clients satisfaction rather than how much money we earn. Ours team will do best for you always.
By Judith from Bolivia - 2017.10.27 12:12
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Michaelia from Bahrain - 2017.09.30 16:36
Related products
-
Factory source Aluminum Extrusion Machine - Co...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
China OEM Continuous Extrusion Machine - Conti...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Chinese Professional Copper Rod Continuous Cast...
Raw material Good quality copper cathode is suggested to be the raw material for the production to ensure the high mechanical and electrical quality product. Some percentage of recycled copper could be used too. The de-oxygen time in the furnace will be longer and that may shorter the working life of the furnace. A separte melting furnace for the copper scrap could be installed before the melting furnace to use full recycled copper. Furnace Bricks and sand built with melting channels, the fur...
-
100% Original Straight Steel Wire Drawing Machi...
Machine model LT21/200 LT17/250 LT21/350 LT15/450 Inlet wire material High /Medium / Low carbon steel wire; Stainless steel wire; Alloy steel wire Drawing passes 21 17 21 15 Inlet wire Dia. 1.2-0.9mm 1.8-2.4mm 1.8-2.8mm 2.6-3.8mm Outlet wire Dia. 0.4-0.15mm 0.6-0.35mm 0.5-1.2mm 1.2-1.8mm Drawing speed 15m/s 10 8m/s 10m/s Motor power 22KW 30KW 55KW 90KW Main bearings International NSK, SKF bearings or customer ...
-
100% Original Prestressing Steel Stranding Mach...
● Heavy duty machine with nine 1200mm blocks ● Rotating type pay-off suitable for high carbon wire rods. ● Sensitive rollers for wire tension control ● Powerful motor with high efficiency transmission system ● International NSK bearing and Siemens electrical control Item Unit Specification Inlet wire Dia. mm 8.0-16.0 Outlet wire Dia. mm 4.0-9.0 Block size mm 1200 Line speed mm 5.5-7.0 Block motor power KW 132 Block cooling type Inner water...
-
Good Quality Continuous Casting And Rolling Mac...
Productivity •fully automatic spool changing system for continuous operation Efficiency •air pressure protection, traverse overshoot protection and traverse rack overshoot protection etc. minimizes failure occurrence and maintenance Type WS630-2 Max. speed [m/sec] 30 Inlet Ø range [mm] 0.5-3.5 Max. spool flange dia. (mm) 630 Min barrel dia. (mm) 280 Min bore dia. (mm) 56 Max. gross spool weight(kg) 500 Motor power (kw) 15*2 Brake method Disc brake Machine size(L*W*H) (m) ...