Manufacturer for Submerged Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng
Manufacturer for Submerged Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng Detail:
The line is composed by following machines
● Horizontal or vertical type coil pay-off
● Mechanical descaler & Sand belt descaler
● Water rinsing unit & Electrolytic pickling unit
● Borax coating unit & Drying unit
● 1st Rough dry drawing machine
● 2nd Fine dry drawing machine
● Triple recycled water rinsing & pickling unit
● Copper coating unit
● Skin pass machine
● Spool type take-up
● Layer rewinder
Main technical specifications
|
Item |
Typical Specification |
|
Inlet wire material |
Low carbon steel wire rod |
|
Steel wire diameter(mm) |
5.5-6.5mm |
|
1st Dry drawing process |
From 5.5/6.5mm to 2.0mm |
|
Drawing block No.: 7 |
|
|
Motor power: 30KW |
|
|
Drawing speed: 15m/s |
|
|
2st Dry drawing process |
From 2.0mm to final 0.8mm |
|
Drawing block No.: 8 |
|
|
Motor power: 15Kw |
|
|
Drawing speed: 20m/s |
|
|
Coppering unit |
Only chemical coating type or combined with electrolytic coppering type |
Product detail pictures:
Related Product Guide:
As a way to present you with ease and enlarge our enterprise, we also have inspectors in QC Workforce and assure you our greatest support and solution for Manufacturer for Submerged Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng , The product will supply to all over the world, such as: Melbourne, Istanbul, Panama, Now, we professionally supplies customers with our main merchandise And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.
By Jeff Wolfe from Kenya - 2017.11.20 15:58
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Astrid from Doha - 2018.11.11 19:52
Related products
-
Hot New Products Aluminum Rod Casting And Rolli...
Brief Process Flow Casting machine to get cast bar → roller shearer → straightener → multi-frequency induction heater → feed-in unit → rolling mill → cooling → coiling Advantages With years of machine improvement, our supplied machine is along with the service as: -high energy saving furnace with controlled molten quality -high productivity and efficiency -easy operation and maintain -consistent rod quality -technical support from machine startup to daily machine running Service The t...
-
Hot Sale for Under Roller Type Steel Rope Stran...
Main technical data No. Model Number of bobbin Rope size Rotating Speed (rpm) Tension wheel size (mm) Motor power (KW) Min. Max. 1 KS 6/630 6 15 25 80 1200 37 2 KS 6/800 6 20 35 60 1600 45 3 KS 8/1000 8 25 50 50 1800 75 4 KS 8/1600 8 50 100 35 3000 90 5 KS 8/1800 8 60 120 30 4000 132 6 KS 8/2000 8 70 150 25 5000 160
-
Factory best selling Wet Steel Wire Drawing Mac...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Factory For Electrolytic Galvanizing Line For S...
Features ● Forged or casted capstan with hardness of HRC 58-62. ● High efficiency transmission with gear box or belt. ● Movable die box for easy adjustment and easy die changing. ● High performance cooling system for the capstan and die box ● High safety standard and friendly HMI control system Available options ● Rotating die box with soap stirrers or rolling cassette ● Forged capstan and tungsten carbide coated capstan ● Accumulation of first drawing blocks ● Block stripper for coiling ● Fi...
-
Newly Arrival Wire Making Machine - Continuous...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Factory wholesale Continuous Hot Dip Steel Wire...
Main technical data No. Model Number of bobbin Rope size Rotating Speed (rpm) Tension wheel size (mm) Motor power (KW) Min. Max. 1 KS 6/630 6 15 25 80 1200 37 2 KS 6/800 6 20 35 60 1600 45 3 KS 8/1000 8 25 50 50 1800 75 4 KS 8/1600 8 50 100 35 3000 90 5 KS 8/1800 8 60 120 30 4000 132 6 KS 8/2000 8 70 150 25 5000 160