OEM Supply Steel Strip Forming Machine - Steel Wire Hot-Dip Galvanizing Line PengSheng
OEM Supply Steel Strip Forming Machine - Steel Wire Hot-Dip Galvanizing Line PengSheng Detail:
Galvanized wire products
● Low carbon bedding spring wire
● ACSR (Aluminum conductor steel reinforced)
● Armoring cables
● Razor wires
● Baling wires
● Some general purpose galvanized strand
● Galvanized wire mesh & fence
Main features
● High efficiency heating unit and insulation
● Matal or ceramic pot for zinc
● Immersion type burners with full-auto N2 wiping system
● Fumes energy reused on the dryer and zinc pan
● Networked PLC control system
|
Item |
Specification |
|
Inlet wire material |
Low carbon &High carbon alloy and non-alloy galvanized wire |
|
Steel wire diameter(mm) |
0.8-13.0 |
|
Number of steel wires |
12-40 (As customer required) |
|
Line DV value |
≤150 (Depend on product) |
|
Temperature of liquid zinc in zinc pot(℃) |
440-460 |
|
Zinc pot |
Steel pot or ceramic pot |
|
Wiping method |
PAD, Nitrogen, Charcoal |
Product detail pictures:
Related Product Guide:
As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for OEM Supply Steel Strip Forming Machine - Steel Wire Hot-Dip Galvanizing Line PengSheng , The product will supply to all over the world, such as: venezuela, The Swiss, Thailand, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By Eleanore from Plymouth - 2018.06.18 19:26
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Nancy from moldova - 2017.01.11 17:15
Related products
-
Hot sale PC Steel Wire Stranding Machine - Con...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
OEM/ODM Factory Wet Steel Wire Drawing Line - ...
Machine model LT21/200 LT17/250 LT21/350 LT15/450 Inlet wire material High /Medium / Low carbon steel wire; Stainless steel wire; Alloy steel wire Drawing passes 21 17 21 15 Inlet wire Dia. 1.2-0.9mm 1.8-2.4mm 1.8-2.8mm 2.6-3.8mm Outlet wire Dia. 0.4-0.15mm 0.6-0.35mm 0.5-1.2mm 1.2-1.8mm Drawing speed 15m/s 10 8m/s 10m/s Motor power 22KW 30KW 55KW 90KW Main bearings International NSK, SKF bearings or customer ...
-
Big discounting Cable Extrusion Machine - Cont...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Manufactur standard Copper Extrusion Machine -...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Factory Outlets Steel Wire Galvanizing Line - ...
Main features ● High speed rotor system with international brand bearings ● Stable runinng of wire stranding process ● High quality seamless steel pipe for stranding tube with tempering treatment ● Optional for the preformer, post former and compacting equipment ● Double capstan haul-offs tailored to the customer requirements Main technical data No. Model Wire Size(mm) Strand Size(mm) Power (KW) Rotating Speed(rpm) Dimension (mm) Min. Max. Min. Max. 1 6/200 0...
-
Manufacturing Companies for Big Bearing Steel S...
Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...