Online Exporter Nitrogen Wiping Steel Wire Galvanizing Line - Steel Wire Electro Galvanizing Line PengSheng
Online Exporter Nitrogen Wiping Steel Wire Galvanizing Line - Steel Wire Electro Galvanizing Line PengSheng Detail:
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requirements. (1) Pay-offs: Both spool type pay-off and coil type pay-off will be equipped with straightener, tension controller and wire disordered detector to have smoothly wire decoiling. (2) Wire surface treatment tanks: There are fumeless acid pickling tank, degreasing tank, water cleaning tank and activation tank that used for cleaning the wire surface. For low carbon wires, we have the annealing furnace with gas heating or electro heating. (3) Electro galvanizing tank: We use the PP plate as frame and Ti plate for wire galvanizing. The processing solution can be circulated that easy for maintenance. (4) Drying tank: The whole frame is welded by stainless steel and the liner uses fiber cotton to control the inner temperature between 100 to 150℃. (5) Take-ups: Both spool take-up and coil take-up can be used for different sizes galvanized wires. We have supplied hundreds of galvanizing lines to domestic customers and also exported our whole lines to Indonesia, Bulgaria, Vietnam, Uzbekistan, Sri Lanka.
Main features
1. Applicable for high/medium/low carbon steel wire;
2. Better wire coating concentricity;
3. Lower power consumption;
4. Better control of coating weight and consistency;
Main technical specification
|
Item |
Data |
|
Wire diameter |
0.8-6.0mm |
|
Coating weight |
10-300g/m2 |
|
Wire numbers |
24 wires (Can be required by customer) |
|
DV value |
60-160mm*m/min |
|
Anode |
Lead sheet or Titanuim polar plate |
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and service consciousness, our company has won a superb reputation between customers all around the environment for Online Exporter Nitrogen Wiping Steel Wire Galvanizing Line - Steel Wire Electro Galvanizing Line PengSheng , The product will supply to all over the world, such as: Panama, Canberra, Mauritania, Our company will continue to adhere to the " superior quality, reputable, the user first " principle wholeheartedly. We warmly welcome friends from all walks of life to visit and give guidance, work together and create a brilliant future!
By Lesley from Sri Lanka - 2018.09.23 17:37
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Elaine from South Africa - 2018.02.21 12:14
Related products
-
Lowest Price for PC Steel Wire Stablization Lin...
Features ● Forged or casted capstan with hardness of HRC 58-62. ● High efficiency transmission with gear box or belt. ● Movable die box for easy adjustment and easy die changing. ● High performance cooling system for the capstan and die box ● High safety standard and friendly HMI control system Available options ● Rotating die box with soap stirrers or rolling cassette ● Forged capstan and tungsten carbide coated capstan ● Accumulation of first drawing blocks ● Block stripper for coiling ● Fi...
-
Factory supplied Wire Processing Machine - Con...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Popular Design for Laser Marking Machine - Con...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Discount Price Co2 Laser Marking Machine - Con...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
New Arrival China Mig Welding Wire Plant - Flu...
The line is composed by following machines ● Strip pay-off ● Strip surface cleaning unit ● Forming machine with powder feeding system ● Rough drawing and fine drawing machine ● Wire surface cleaning and oiling machine ● Spool take-up ● Layer rewinder Main technical specifications Steel strip material Low carbon steel, stainless steel Steel strip width 8-18mm Steel tape thickness 0.3-1.0mm Feeding speed 70-100m/min Flux filling accuracy ±0.5% Final drawn wire ...
-
Factory Supply High Carbon Prestress Wire Drawi...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...