Reasonable price Flux Cored Welding Wire Forming Machine - Welding Wire Drawing & Coppering Line PengSheng
Reasonable price Flux Cored Welding Wire Forming Machine - Welding Wire Drawing & Coppering Line PengSheng Detail:
The line is composed by following machines
● Horizontal or vertical type coil pay-off
● Mechanical descaler & Sand belt descaler
● Water rinsing unit & Electrolytic pickling unit
● Borax coating unit & Drying unit
● 1st Rough dry drawing machine
● 2nd Fine dry drawing machine
● Triple recycled water rinsing & pickling unit
● Copper coating unit
● Skin pass machine
● Spool type take-up
● Layer rewinder
Main technical specifications
|
Item |
Typical Specification |
|
Inlet wire material |
Low carbon steel wire rod |
|
Steel wire diameter(mm) |
5.5-6.5mm |
|
1st Dry drawing process |
From 5.5/6.5mm to 2.0mm |
|
Drawing block No.: 7 |
|
|
Motor power: 30KW |
|
|
Drawing speed: 15m/s |
|
|
2st Dry drawing process |
From 2.0mm to final 0.8mm |
|
Drawing block No.: 8 |
|
|
Motor power: 15Kw |
|
|
Drawing speed: 20m/s |
|
|
Coppering unit |
Only chemical coating type or combined with electrolytic coppering type |
Product detail pictures:
Related Product Guide:
We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most aggressive costs. So Profi Tools offer you finest benefit of money and we are ready to produce alongside one another with Reasonable price Flux Cored Welding Wire Forming Machine - Welding Wire Drawing & Coppering Line PengSheng , The product will supply to all over the world, such as: Canada, Tunisia, Marseille, Upon today, we have customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to provide the highest quality products with best price. We are looking forward to doing business with you!
By Joyce from Amsterdam - 2017.09.26 12:12
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Tina from Amman - 2018.06.18 19:26
Related products
-
Manufactur standard Copper Extrusion Machine -...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
2022 China New Design Insulating Paper Taping M...
Main technical data Round conductor diameter: 2.5mm—6.0mm Flat conductor area: 5 mm²—80 mm²（Width: 4mm-16mm, Thickness: 0.8mm-5.0mm） Rotating speed: max. 1500 rpm Line speed: max. 12 m/min Special Characteristics -Servo drive for the concentric tapping head -IGBT induction heater and moving radiant oven -Auto-stop when film broken -PLC control and touch screen operation Overview Taping IGBT Induction heater Radiant oven Take-up Product
-
Manufactur standard Steel Wire Closing Line - ...
Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...
-
New Arrival China Aluminum Rod Casting And Roll...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4,...
-
China Supplier Steel Strand Closer - Continuou...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Best Price for Wire Strand Processing Line - C...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4,...